Rowmark LaserMark Engraving Substrate, 2-Ply, 24″ x 49″ x .052″

$81.30

Making your mark in the signage and engraving industry is easy with LaserMark. Each sheet of LaserMark’s acrylic material is specially designed for a crisp, clean burn and ultra-fine laser lettering, logos and vector cutouts.

Compare
SKU: N/A Category:

Additional information

Weight N/A
Dimensions N/A
Color

White/Black, Black/White

Specifications

MaterialMicrosurfaced Impact Acrylic
FinishHigh Gloss, Matte non-glare, Brushed, Patterned
Sheet Size
24-1/8" x 48-3/4" (613mm x 1238mm)
Engraving Depth
.003" (.08mm)
UsageInterior Signage
Personal Identification
Trophies and Awards
Fine Detail Engraving
Plaques
CapabilitiesScores
Saws
Drills
Shears
Laser Vector Cuts
Bevels
Heat Bendable
Screen Prints
Hot Stamps
Bonds
UV Printable

 

Physical Properties

IZOD Impact Strength
Notched at 73°F (22.78°C)

Value: 1.10 ft lbs/in

ASTM Method: D-256
Tensile Strength
To break
Elongation before break

Value: 5,500 psi
Value: 50%

ASTM Method: D-638
ASTM Method: D-638
Flexural Strength
Load to stretch outer surface 5%

Value: 10,300 psi

ASTM Method: D-790
Specific Gravity
LaserMark

Value: 1.15

ASTM Method: D-792
Rockwell Hardness
LaserMark

Value: M45

ASTM Method: D-785
Deflection Temperature
Temperature at which material deflects .010" (.254mm) at 264 psi

Value: 175°F (79.44°C)

ASTM Method: D-648
Coefficient of Thermal Expansion
Inch/inch/°F

Value: 5.6 x 10^-5

ASTM Method: D-696
Vicat Softening Point
Temperature for needle to penetrate 1mm (90°F/hr, 2.2 lbs)
Temperature for needle to penetrate 1mm (90°F/hr, 11.0lbs)

Value: 208°F (97.78°C)

Value: 187°F (86.11°C)

ASTM Method: D-1525

ASTM Method: D-1525

Additional Information

LASERMARK softens at about 200°F (93.33°C) sufficiently so that it can be bent as needed. It can be sawed, drilled and bonded, but not sheared.

The base material was tested for flammability by Underwriters Laboratories. The material is rated 94 HB on the UL 94 test.

 

Documents

   Rowmark LaserMark Swatch Page
   Rowmark LaserMark SDS (Safety Data Sheet) - 03/07/2017

 

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.