$81.30
Making your mark in the signage and engraving industry is easy with LaserMark. Each sheet of LaserMark’s acrylic material is specially designed for a crisp, clean burn and ultra-fine laser lettering, logos and vector cutouts.
Weight | N/A |
---|---|
Dimensions | N/A |
Color | White/Black, Black/White |
Material | Microsurfaced Impact Acrylic |
Finish | High Gloss, Matte non-glare, Brushed, Patterned |
Sheet Size | 24-1/8" x 48-3/4" (613mm x 1238mm) |
Engraving Depth | .003" (.08mm) |
Usage | Interior Signage Personal Identification Trophies and Awards Fine Detail Engraving Plaques |
Capabilities | Scores Saws Drills Shears Laser Vector Cuts Bevels Heat Bendable Screen Prints Hot Stamps Bonds UV Printable |
IZOD Impact Strength Notched at 73°F (22.78°C) | Value: 1.10 ft lbs/in | ASTM Method: D-256 |
Tensile Strength To break Elongation before break | Value: 5,500 psi Value: 50% | ASTM Method: D-638 ASTM Method: D-638 |
Flexural Strength Load to stretch outer surface 5% | Value: 10,300 psi | ASTM Method: D-790 |
Specific Gravity LaserMark | Value: 1.15 | ASTM Method: D-792 |
Rockwell Hardness LaserMark | Value: M45 | ASTM Method: D-785 |
Deflection Temperature Temperature at which material deflects .010" (.254mm) at 264 psi | Value: 175°F (79.44°C) | ASTM Method: D-648 |
Coefficient of Thermal Expansion Inch/inch/°F | Value: 5.6 x 10^-5 | ASTM Method: D-696 |
Vicat Softening Point Temperature for needle to penetrate 1mm (90°F/hr, 2.2 lbs) Temperature for needle to penetrate 1mm (90°F/hr, 11.0lbs) | Value: 208°F (97.78°C) Value: 187°F (86.11°C) | ASTM Method: D-1525 ASTM Method: D-1525 |
LASERMARK softens at about 200°F (93.33°C) sufficiently so that it can be bent as needed. It can be sawed, drilled and bonded, but not sheared.
The base material was tested for flammability by Underwriters Laboratories. The material is rated 94 HB on the UL 94 test.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.